Finnmark Designs Sauna EMF Levels: 1.17mG Tested — What It Means


Finnmark Designs Spectrum Plus™ heaters measure a maximum of 1.17mG in independent third-party testing — below the 3mG threshold most researchers consider the upper limit for low-EMF infrared saunas. The Spectrum Carbon panels measure below 0.6mG. Both figures come from a NASA-contracted testing facility (December 2019, report PR108242). For context: Sun Home Equinox measures 0.5mG (Vitatech, January 2025) and Clearlight measures under 1mG. Finnmark’s numbers are credible and within the low-EMF tier — but the test data is five years old, which matters if you’re comparing against brands with recent independent verification.

The Actual Numbers: Finnmark EMF Data

Finnmark publishes EMF test results from an independent third-party laboratory that has contracted with NASA. The published figures are specific and traceable — not the vague “low EMF” marketing language that most budget brands use.

Finnmark Designs EMF Test Results — Official vs Independent

Heater System EMF Reading Test Source Test Date
Spectrum Plus™ (Incoloy short-wave) 1.17mG maximum NTS — National Technical Systems December 2019 (Report PR108242)
Spectrum Carbon 360° (long-wave FIR) <0.6mG NTS — National Technical Systems December 2019 (Report PR108242)

The FD-2 (Hybrid 2.0) uses both heater systems simultaneously — Spectrum Plus™ for short-wave near-infrared and Spectrum Carbon for long-wave far-infrared. In practice, the cabin EMF environment reflects both readings. The Spectrum Plus™ figure of 1.17mG represents the higher of the two and is the number to use when comparing Finnmark against other brands.

How Finnmark EMF Compares to Other Brands

EMF Comparison: Finnmark vs Major Competitors

Brand / Model EMF Reading Test Source Test Date
Sun Home Equinox 2P 0.5mG Vitatech Electromagnetics January 2025
Clearlight Sanctuary 2 <1mG Vitatech Electromagnetics Not published
Finnmark FD-2 (Spectrum Plus™) 1.17mG max NTS — National Technical Systems December 2019
Finnmark FD-2 (Spectrum Carbon) <0.6mG NTS — National Technical Systems December 2019
JNH Joyous 2P <8mG Intertek Not published
Dynamic Barcelona 5–10mG at 2–3″ Brand-stated Not published

All readings at or near seated position. Test methodology varies by brand — direct comparisons should be made cautiously.

EMF Level at Seated Position — Brand Comparison

Dynamic Barcelona5–10mG
JNH Joyous<8mG
Finnmark FD-2 (Spectrum Plus™)1.17mG
Clearlight Sanctuary 2<1mG
Sun Home Equinox0.5mG

Sources: Dynamic (brand-stated) / JNH (Intertek) / Finnmark (NTS, Dec 2019) / Clearlight (Vitatech) / Sun Home (Vitatech, Jan 2025). All readings at or near seated position.

Finnmark’s 1.17mG figure puts it in the same low-EMF tier as Clearlight and well below JNH and Dynamic. The gap between Finnmark and Sun Home (1.17mG vs 0.5mG) is real but relatively small in practical terms — both are well within the range most researchers consider safe for regular use.

The more meaningful difference is the test date. Sun Home’s Vitatech data is from January 2025. Finnmark’s data is from December 2019. EMF test methodology and measurement standards have evolved — a 2025 test and a 2019 test are not directly equivalent even if the numbers look similar.

What These Numbers Actually Mean

EMF numbers without context are just numbers. Here’s the context that matters for infrared sauna buyers:

The reference standard most researchers cite is 3mG — the level above which some studies have found associations with biological effects from prolonged exposure. This is not a regulatory limit (no government body has set one for sauna use), but it’s the threshold the infrared sauna industry has broadly adopted as the benchmark for “low EMF.”

At 1.17mG, Finnmark’s Spectrum Plus™ heaters are well below that 3mG threshold. At 0.6mG, the Spectrum Carbon panels are lower still.

For comparison, common household sources:

Source EMF at close range
Hair dryer (in use) 60–20,000mG
Microwave oven 100–500mG
Laptop computer 4–20mG
Finnmark Spectrum Plus™ 1.17mG max
Sun Home Equinox 0.5mG

The everyday household context matters: you likely encounter higher EMF levels from your laptop or phone than you would sitting in a Finnmark sauna.

The Honest Limitation: Test Data Age

Finnmark’s EMF data is from December 2019 — over five years old at the time of writing. This doesn’t mean the numbers are wrong. Heater technology in the FD-2 hasn’t fundamentally changed since 2019, and the physics of electromagnetic field generation from these heater types is well understood.

But it does mean Finnmark’s data transparency lags behind Sun Home, which published fresh Vitatech testing in January 2025. For buyers who want the most current independent verification, Sun Home currently offers a stronger evidence package on EMF specifically.

If EMF transparency is your primary purchase criterion, the honest ranking is: Sun Home (most current, named lab) → Clearlight (named lab, date not published) → Finnmark (named lab type, 2019) → JNH / Dynamic (limited independent verification).

Pro Tip: If you want to verify EMF levels yourself after purchase, the Trifield TF2 meter ($180 on Amazon) is the instrument most independent sauna reviewers use. Measure at seated position — approximately 3–4 inches from the nearest heater panel — for a comparable reading to published test data.

Does Finnmark’s EMF Level Affect the Buying Decision?

For most buyers, no. At 1.17mG, Finnmark’s Spectrum Plus™ heaters are well within the low-EMF tier. The gap between 0.5mG (Sun Home) and 1.17mG (Finnmark) is not the reason to choose one brand over the other.

The more relevant Finnmark differentiators are temperature (170°F on a standard 120V/15A outlet) and insulation (4-inch mineral wool). If those specs match your needs, the EMF data at 1.17mG should not be a dealbreaker.

EMF becomes a more meaningful factor when comparing Finnmark against brands like Dynamic (5–10mG) or JNH (<8mG). In that comparison, Finnmark’s 1.17mG is clearly superior — roughly 5–8x lower than those alternatives.

Who This Matters Most For

EMF is your primary concern. If ultra-low EMF is the main reason you’re buying a premium sauna, Sun Home (0.5mG, 2025 testing) or Clearlight (<1mG) currently offer stronger independent verification. Finnmark’s 1.17mG is low, but the 2019 test date is a limitation you should know about.

You’re choosing between Finnmark and budget brands. If you’re deciding between Finnmark and Dynamic or JNH on EMF grounds, the comparison is clear: Finnmark’s 1.17mG is 5–8x lower than those alternatives, with independent third-party testing behind it.

Temperature is your primary variable. If you’re buying the Finnmark FD-2 because it reaches 170°F on a standard 120V/15A outlet — the main reason most buyers choose this brand — the EMF data at 1.17mG is a bonus, not the deciding factor.

Finnmark’s EMF numbers are legitimate and place it firmly in the low-EMF tier — 1.17mG is well below the 3mG industry threshold and 5–8x lower than budget brands like Dynamic and JNH. The honest caveat is test data age: NTS testing from December 2019 is five years old compared to Sun Home’s Vitatech data from January 2025. If EMF transparency is your primary purchase criterion, Sun Home currently offers fresher independent verification. If you’re buying Finnmark for its 170°F on a standard 120V/15A outlet, the EMF data at 1.17mG is a solid bonus — not a liability.

Finnmark FD-2 vs Sun Home Equinox: Which Has Better EMF?

Sun Home measures 0.5mG (Vitatech, Jan 2025). Finnmark measures 1.17mG (NTS, Dec 2019). Both are low-EMF — but the data tells different stories on recency and verification depth.

PRL affiliate application with Finnmark Designs pending at time of publishing.

What Real Owners Say

EMF data tells you the numbers. Real owners tell you what it actually feels like to use the sauna every day.

“We have the full spectrum Finnmark FD-2. Love it. Assembled easy, lights, Bluetooth stereo, made of Western Red Cedar. Gets to 77°C (170°F).”

— u/Funky-Feeling, r/infraredsauna

That 77°C figure is worth noting — it’s a verified real-world temperature from an actual owner, not a controlled lab test. It’s also consistent with Finnmark’s manufacturer claim and the physics of their 4-inch mineral wool insulation system.

“We like Finnmark Designs. It’s the only IR room built to European Finnish sauna standards — mineral wool insulation and aluminum radiant barrier. It has a lifetime warranty and good US-based tech support. It’s not the cheapest option though.”

— u/saunamarketplace, r/infraredsauna

The mention of mineral wool insulation and aluminum radiant barrier is relevant beyond just thermal performance — these materials also contribute to the low-EMF environment inside the cabin by reducing electromagnetic field transmission through the walls. It’s one reason Finnmark’s insulation spec matters to EMF-conscious buyers, not just temperature performance.

Frequently Asked Questions

What is the EMF level of the Finnmark Designs sauna?

The Finnmark Spectrum Plus™ heaters measure a maximum of 1.17mG, and the Spectrum Carbon panels measure below 0.6mG, both from independent third-party testing at a NTS — National Technical Systems in December 2019 (report PR108242). These figures place Finnmark in the low-EMF tier alongside Clearlight and well below budget brands like Dynamic and JNH.

Is Finnmark a low-EMF sauna?

Yes, by the industry-standard definition. The broadly accepted low-EMF threshold in the infrared sauna industry is 3mG. Finnmark’s Spectrum Plus™ heaters measure 1.17mG — well below that threshold. The Spectrum Carbon panels measure below 0.6mG, which approaches the ultra-low EMF range.

How does Finnmark EMF compare to Sun Home and Clearlight?

All three are in the low-EMF tier, but Sun Home currently has the most current independent data. Sun Home Equinox measures 0.5mG (Vitatech, January 2025). Clearlight measures under 1mG (Vitatech, date not published). Finnmark measures 1.17mG (NTS — National Technical Systems, December 2019). The practical difference between these brands’ EMF levels is small — the more meaningful difference is test recency.

Why does Finnmark use a NTS — National Technical Systems for EMF testing?

The lab Finnmark uses has contracted with NASA for testing work — this establishes the facility’s credibility but doesn’t mean NASA itself tested the sauna. The data is published and traceable (report PR108242). It is independent third-party testing, not self-reported data, which puts it in a different category from brands that simply claim “low EMF” without published figures.

Is 1.17mG considered high EMF?

No. Most low-EMF infrared saunas target below 3mG. Finnmark’s published test result of 1.17mG is well below that threshold — placing it firmly in the low-EMF tier alongside Clearlight and Sun Home, and significantly lower than budget brands like Dynamic (5–10mG) and JNH (<8mG).

Is the Finnmark sauna EMF level safe?

Yes. Finnmark’s Spectrum Plus™ heaters measure 1.17mG — well below the 3mG threshold most researchers cite as the upper limit for low-EMF infrared saunas. No government body has established a regulatory EMF limit for sauna use, but the international scientific consensus suggests that low-power, low-frequency electromagnetic radiation at these levels does not constitute a health hazard for typical sauna sessions of 30–45 minutes.

Should I choose Finnmark or Sun Home based on EMF?

If EMF is your only criterion, Sun Home currently has the edge — 0.5mG with Vitatech testing from January 2025 versus Finnmark’s 1.17mG with NTS testing from December 2019. But EMF alone is rarely the right reason to choose between these two brands. Sun Home requires a dedicated 120V/20A circuit; Finnmark FD-2 runs on a standard 120V/15A outlet. Finnmark claims 170°F; Sun Home is verified at 165°F by Garage Gym Reviews. The electrical requirement and temperature performance are more meaningful differentiators than the gap between 0.5mG and 1.17mG.

Related Reading — Finnmark Designs Cluster